British Rema was delighted to be offered the opportunity to contribute an article to Process Industry Informer magazine where the company was able to showcase its in-depth knowledge on Milling Technology. The end result was three full pages of coverage on page 74, 75 and 76. A great opportunity to demonstrate how we can support customers with not just products and services, but our years of combined expertise.
The issue featuring this article can be found here: https://magazine.processindustryinformer.com/books/PII-december-2025/#p=1

Thanks to the team at the magazine for the opportunity to contribute.

British Rema was commissioned by one of the UK’s largest chemical producers to develop a replacement head for its 250M Classifier.

Sounds straightforward right?

Developing the replacement head – yes. However, the real challenge for the team was the installation. With the only access to the machine via a small lift and the lift smaller than the classifier head, getting the part to the right place was a head scratcher.

Always keen to rise to a challenge, British Rema engineers put their heads together to reevaluate the design and assembly of the replacement head. They concluded that removing the main support plate (and using the existing one on site which was still functional) and designing a frame that could be pre-built, pre-balanced and used for delivery would provide the optimum solution. On site, the head will be partially dismantled and moved up in the lift a chunk at a time where our engineers will be waiting to build the head into the machine a few floors up.

So, for innovative parts support and aftercare – even when it’s a logistical challenge – don’t hesitate to contact the experts at British Rema.

Ends